What is MissionPlanner?

MissionPlanner

MissionPlanner is a cool open-source app that works like a virtual ground control station for your copters, planes, or rovers. It helps you tweak all the settings on your autonomous devices so they perform at their best.

Quick and Easy Setup

Getting started with MissionPlanner is super simple! Just follow the instructions in the installation kit after you unzip the file. If you need a driver for your device and don’t have it yet, no worries—the app will prompt you to install it.

Connecting Your Device

Once you're in the app, connect it to your AutoPilot. This step is key if you want to control your land or air vehicle through MissionPlanner. You can connect via USB, telemetry radios, Bluetooth, or even IP connections, depending on what type of device you're using.

Loading Firmware

The app will detect which board you're using and ask you to load the right firmware for it. You can also check out the Initial Setup function to make sure everything’s running smoothly with the firmware.

Create Missions Step-by-Step

The best part? You can create detailed missions for your gadget! Start by setting up a home point and specifying an altitude—don’t sweat it if you're not sure; leaving it at the default 100 meters works just fine!

Add Waypoints and Commands

Next up, enter waypoints and commands based on what you want your device to do during its mission. You’ve got options like loitering, splitting paths, changing speed, landing, jumping between points, and returning home—just to name a few!

Why Choose MissionPlanner?

If you're into autonomous devices like aircraft or guided vehicles but want more control over how they operate and set up multi-waypoint missions easily, then MissionPlanner could be just what you need!

How Download Works

Go to the Softpas website, press the 'Downloads' button, and pick the app you want to download and install—easy and fast!